Does my modem support Caller ID?

Fax Server Pro Version 3.x

First make sure you can see the Caller ID information from a normal telephone LED displayer.

Then do the following:

Launch Fax Server Pro;
Click Stop-Sending and Stop Receiving buttons on the toolbar;
Select Server menu, click Devices Settings..., the Fax Devices Settings dialog box will be displayed;
Select the Fax Modem you wish to check in the Devices list, click Caller ID Detection button;
In Caller ID detection dialog box, press Detect Now button, the software will automatically check the available AT command;
Follow the prompt, click Test Now! button, then dial your phone by using another phone;
If Caller ID is not working, you will only see the word RING for each incoming ring. If this is the case try another Caller ID Command and try it again;
If Caller ID is working, you will see the word RING, followed by one or more additional data lines. The word RING will then continue to appear for each incoming ring;
At last, press OK button to apply the caller id command.